Last Modified: 11-29-2007 1.6 A
Service Category: Vehicle Interior Section: Door Lock
Model Year: 2008 Model: Sequoia Doc ID: RM000002ZQ6002X
Title: DOOR LOCK: UNLOCK WARNING SWITCH: REMOVAL (2008 Sequoia)

REMOVAL

1. REMOVE FRONT DOOR SCUFF PLATE LH INTERIOR PANELS / TRIM: ROOF HEADLINING: REMOVAL (2008 Sequoia)+

2. REMOVE COWL SIDE TRIM BOARD LH INTERIOR PANELS / TRIM: ROOF HEADLINING: REMOVAL (2008 Sequoia)+

3. REMOVE INSTRUMENT SIDE PANEL LH INTERIOR PANELS / TRIM: INSTRUMENT PANEL SAFETY PAD: REMOVAL (2008 Sequoia)+

4. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH INTERIOR PANELS / TRIM: INSTRUMENT PANEL SAFETY PAD: REMOVAL (2008 Sequoia)+

5. REMOVE LOWER STEERING COLUMN COVER WIPER / WASHER: WIPER SWITCH: REMOVAL (2008 Sequoia)+

6. REMOVE UPPER STEERING COLUMN COVER WIPER / WASHER: WIPER SWITCH: REMOVAL (2008 Sequoia)+

7. REMOVE UNLOCK WARNING SWITCH

(a) Disconnect the connector.

(b) Insert the key into the ignition key cylinder.

(c) Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws and remove the unlock warning switch.